Dry Shotcrete
Water Repellent, Silica Fume Modified Shotcrete with Micro Fibers View Item For over a century, The Euclid Chemical Company has served the global building market as a worldwide quality supplier of specialty products and technical support services for the concrete and masonry construction industry. The products we can provide include Dry-mix Shotcrete Machine, Wet-mix Shotcrete Machine, Truck-mounted Shotcrete Machine and Truck-mounted Robot Shotcrete Machine. REQUEST A QUOTE +86-35 email protected. Shotcrete is an “all-encompassing” term used to describe pneumatically projected concrete or mortar using either the dry-mix process or the wet-mix process.
Dry Shotcrete Mix Design
For Phneumatically Applied Dry Process Shotcrete Applications
ACI Gradation 1 (DP-01), ACI Gradation 2 (DP-02) and ACI Gradation 3 (DP-03)
SPEC MIX Dry Process Shotcrete products are suited for but not limited to the repair of bridges, parking structures, dams, or any concrete structure as well as use for new construction projects including tunnels, shaft linings, soil nailing, pools and concrete structures.
Dry Shotcrete Equipment
SPEC MIX Dry Process Shotcrete is produced under strict manufacturing standards supported by complete quality control measures that are assigned to each batch. A digital printout displaying the proper proportions per batch may be kept as a permanent record. SPEC MIX shotcrete products are designed to meet applicable shotcrete ASTM and ACI standards.
• Specifically formulated for enhanced shooting characteristics and physical performance making this product ideal for pneumatically applied concrete applications
• Formulations come in ACI gradation 1 (DP-01) and gradation 2 (DP-02 & DP-03) to allow the applicator the ability to select a product specifically designed with an aggregate gradation formulated for the depth of the application
• Suited for, but not limited to, the repair of bridges, parking structures, dams, or any concrete structure
• Available in 80 lb (36.2 kg) and 3,000 lb (1,360.7) bulk bag, SPEC MIX Dry Process Shotcrete is engineered for optimal adhesion and durability
| Dry Process Typical Field Data | |||
|---|---|---|---|
| Compressive Strength (ASTM C 42) | DP-01 | DP-02 | DP-03 |
| 1-Day | 2,200 PSI (15.1 MPa) | 2,500 PSI (17.2 MPa) | 3,000 PSI (20.6 MPa) |
| 3-Day | 4,000 PSI (27.5 MPa) | 4,250 PSI (29.3 MPa) | 4,500 PSI (31.0 MPa) |
| 7-Day | 5,000 PSI (34.4 MPa) | 5,500 PSI (37.9 MPa) | 5,750 PSI (39.6 MPa) |
| 28-Day | 6,000 PSI (41.3 MPa) | 7,000 PSI (48.2 MPa) | 7,500 PSI (51.7 MPa) |
| Min Flexural Strength (ASTM C 78) | |||
| 28-Day | 900 PSI (6.2 MPa) | 900 PSI (6.2 MPa) | 900 PSI (6.2 MPa) |
| Rapid Chloride Permeability (ASTM C 1202) | 700 COULOMBS | 700 COULOMBS | 700 COULOMBS |
| Rapid Freeze/Thaw (ASTM C 666) Durability Factor | 90 | 90 | 90 |
| Actual results may vary due to workmanship, regional material variations, and jobsite conditions. | |||
Aggregate gradation plays a crucial role in the performance of shotcrete. SPEC MIX Shotcrete products are designed to meet ACI 506R gradation 1 or 2.
Thoroughly tested and trialed by certified nozzlemen, SPEC MIX Dry Process Shotcrete is a dry
concrete product designed for dry process shotcrete applications. SPEC MIX shotcrete should be installed in accordance with the provisions of the national or local building code and The American Concrete Institute’s recommended practices ACI, “Guide to Shotcrete”. Shotcrete products should be applied only by an experienced, certified nozzleman.
Substrate preparation is critical for promoting good bond. When applying shotcrete materials to concrete surfaces, any deteriorated concrete should be removed until sound concrete is exposed. The exposed surface should be free of loose and/or friable material, and dust. When combining water with the shotcrete mixture, use clean, potable water.
SPEC MIX Dry Process Shotcrete materials should be pneumatically installed. Hot and/ or dry conditions may cause the shotcrete to harden more rapidly; therefore, a fog mist may be required to ensure proper curing. Prior to the application of shotcrete, the substrate should be cleaned and evenly moistened, but not saturated.
Although SPEC MIX shotcrete products are designed to reduce rebound, some rebound is to be expected. Do not incorporate rebound material back into the applied shotcrete. Once the shotcrete is applied, a variety of finishing techniques can be used to achieve the desired surface texture. Some applications may require a finish (flash) coat. After the desired finish is achieved, provide sufficient moisture to permit continuous hydration of the cementitious materials for optimum curing.
SPEC MIX shotcrete products are available in 80 lb (36.2 kg) packages for easy hand loading, or in 3,000 lb (1,360.7 kg) reusable bulk bags to be used with the various SPEC MIX silo systems. When using the silo system, once the bulk bags of shotcrete mix are delivered to the project site, the portable silo is loaded with a job site forklift and the product is dispensed into the shotcrete machine as needed.